About what you’d expect from a NSFW image perspective, so we’ll put this one behind a jump…
Whilst perusing the Tumblr, I saw a new (for me) stainless device.
Turns out the BON4 guys of silicone device fame have a new metal option, the BON4M. Looks nice. I like the cage design. Very sleek. Also a big fan of the brushed metal look. Aren’t too many using that finish out there that I’m aware of. Also like that the gaps between the bars seem too narrow to do much more than get the tips of your pinky in there but are ample enough to allow for easy cleaning.
Not sure about those hinged rings, though. It seems to me that the gaps down there would be a place where irritation would form, especially when the hydraulics are active. I’m a fan of solid rings, myself. And the brass lock sitting on top of that metal cage might end up being a lot like tieing a little cowbell on your penis. Also, though it’s very hard to know from the images, I wonder how smooth the BON4M is. Little bits and burrs are just more opportunities for discomfort and hot spots. Finally, that A-ring has the dreaded sharp corners like the CB-6000. Bah!
Anyone out there have any experience with the BON4M?
In other new device news, the Holy Trainer’s been redesigned. Their great A-ring appears to be the same and the tube looks largely unchanged, as well, but it’s sporting an all new and simplified lock design.
In my Holy Trainer review, I was concerned about how durable the hole through which the padlock was locked would prove to be over time. This new design appears to totally resolve that by eliminating the padlock all together (along with the little cap that held the ring and tube together). It’s the only plastic device I know of that uses the same type of integrated lock Steelworxx offers. Looks bulky, but not any bulkier than the old design which, in practice, wasn’t all that big a deal. It’s still made of the controversial “biosourced resin” so the caveats regarding the clear version and heat-related breakage remains, I assume.
While I haven’t worn it, this new design looks even better than the old one. Still waiting to see what CB-X’s response will be. The Holy Trainer is a very competitive product and the CB-6000 is looking older and less innovative by the day.
Finally, I’m noodling a revised Looker 02. The one I’m wearing right now is, truth be told, my favorite of Belle’s steel devices, but it could be improved. The urethral insert would be better if it were bigger. It’s 6mm in diameter and it tends to retain fluid after urinating. I think that, if it were bigger (maybe 9 or 10mm), the urine would be more likely to drain. The extra girth wouldn’t be a problem as that’s still much smaller than the largest sound I’ve used.
In addition, the cap at the end of the cage could be improved if it were just about 10mm longer. The edge of the penis’ glans occasionally gets pinched between my pants/underwear and the lip of the cap. If it were just a tad longer, that’d resolve the issue. Additionally, the overall length of the device could be about 5mm or so shorter and the diameter of the cage could even be a little smaller.
I’ve sketched up what I’m thinking. We might order this, though with the cap modification and at current exchange rates, it’d be pushing $500. Not cheap, though tons cheaper than a Steelwerks device. Not sure Belle’ll ever spring the three grand (or more) needed to get one of those. Alas.